Forums:
Hola a todos saben tengo un problema al instalar Debian con Installer
Instalo Debian y sigo todos los pasos quer me dice pero al final cuando acabo de instalar la base de Debian y vuelvo a arrancar me sale esto "Error 18" y no se que puede ser, esto sale cuando trata de cargar el arranque GRUB desde el track 0 en el MBR
caracteristicas:
maquina: Intel Pentium MMX de 200Mhz
HDD: 10 Gb todo lo utilizo para Debian
Red. Tarjeta Ethernet 3com EtherLink III
Sera que se daño la pista 0 del HDD????
por favor ayudemne gracias de antemano....
Me atrevía a extraer este
Me atrevía a extraer este fragmento de http://wiki.linuxquestions.org/wiki/GRUB#Error_18
(Espero no esté violando ninguna ley de derechos de autor :>)
Error 18
Error 18: Selected cylinder exceeds maximum supported by BIOS
This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB on others.). In more practical terms this means the BIOS is unable to start executing the kernel because the kernel is not located within the block it can access at boot up time.
This can be circumvented by creating a boot partition at the beginning of the disk that is completely within the first 1023 cylinders of the harddrive. This partition will contain the kernel.
The kernel it self does not suffer from the same limitations as the BIOS so after the BIOS has loaded the kernel the kernel will have no problem accessing the whole harddrive. Newer BIOSes will automatically translate the harddrives size in a way that it can be completely contained within the first 1023 cylinders and hence modern computers do not suffer from this problem.
The same error can happen when the BIOS detects a disk in a different way as Linux does. This can happen when changing motherboards or when moving a GRUB-bootable disk from one computer to another. If this happens, just boot with a GRUB floppy, read the C/H/S numbers from the existing partition table and manually edit the BIOS numbers to match. If using a SUSE linux and installing on VM Ware this problem is solved by creating a small partition at the very beginning of the harddisc, and mounting it as /boot.
En definitiva el problema es que puede ser que tu bios tiene mal configurada la geometría del disco que estás utilizando, y San Google te da algunas alternativas, la primera es corregir esto en el bios, otra es crear la partición /boot al principio del disco con un tamaño de no más de 512 MB, y por último puedes intentar forzar a ser partición arrancable( o primaria, no recuerdo bién cómo dice el Disk Druid), al momento de crear las particiones.
Espero haberte colaborado y nos comentas cómo te fué.
Hasta la próxima.
Saludos.
F1 Tecnología Informática
Si citas la fuente y aclaras
Si citas la fuente y aclaras que es una cita textual no hay violación de derechos de autor :)
bye
:)
Muy bueno tu inglés
Yo no hubiese entendido nada!!!
Si el español no lo entiendo bien... pero bueno esto es digno de felicitarte "Muy bueno tu inglés".
De paso gracias, por si se ofrece para alguna oportunidad!!!
Suerte!!
[img]http://counter.li.org/cgi-bin/certificate.cgi/390640[/img]...
Patricio (Ofinet)
ofinet_center@hotmail.com
Ambato...
[img]http://counter.li.org/cgi-bin/certificate.cgi/390640[/img]...
Patricio (Ofinet)
ofinet_center@hotmail.com
Ambato...
Suele pasar cuando la
Suele pasar cuando la partición de arranque es demasiado grande :), no deberías necesitar mas de 50 Mb en el /boot 100 Mb exagenrando, trata de que sea la primera partición primaria (no extendida) y debería funcionar, si ya tienes instalado y no quieres reinstalar, podrías redimencionar una partición y dejar espacio para crearte un nuebo /boot pasar los archivos necesarios, hacer los cambios en /etc/fstab, grub.conf etc ...
Reinstalar grub y listo
bye
:)
Gracias por tu corrección
Gracias por tu corrección Deadth, la verdad sólo me concentré en el extracto y se me olvidó la recomendación que tú das, en general, las particiones para /boot, no deben ser demasiado grandes, siempre es bueno que la persona que realiza la instalación investigue un poquito al respecto.
Saludos.
F1 Tecnología Informática
Cómo está tu ...
Podrías postear como está tu configuración en cuánto a particiones...
Aunque en una sola partición no da problemas.
Una partición como /
y otra para swap
Claro que no es recomendable, algo debe estar
Además puedes probar poniendo forzar a que sea partición primaria
y listo!!!
[img]http://counter.li.org/cgi-bin/certificate.cgi/390640[/img]...
Patricio (Ofinet)
ofinet_center@hotmail.com
Ambato...
[img]http://counter.li.org/cgi-bin/certificate.cgi/390640[/img]...
Patricio (Ofinet)
ofinet_center@hotmail.com
Ambato...
Particiones
Puedes usar esta
Primaria 270.6 MB Ext3 /
Lógica 5.0 GB Ext3 /usr
Lógica 3.0 GB Ext3 /var
Lógica 740.2 MB swap swap
Lógica 403.0 MB Ext3 /tmp
Lógica 20.6 GB Ext3 /home
Claro que debes adecuarla a tu modelo de disco duro el mio era de 30GB y esta partición lo realiza automaticamente el Debian Installer, aqui hay una guia de como [url=http://www.ecualug.org/?q=2006/01/11/blog/elsanto/instalacion_de_debian_sarge_con_el_debian_installer]instalar Debian Sarge con el debian installer[/url] :)
"Primero te ignoran, luego se burlan, después te atacan, después ganas"----Mohandas Gandhi.
Si tienes ninos que
Si tienes ninos que constantemente apagan tu computador con el boton reset, o por tu casa se va la luz constantemente te recomendaria utilizar reiserfs en vez de ext3.
-------------------------
Antes de preguntar visita esta dirección :evil:
-----
Visita este [url=http://www.sindominio.net/ayuda/preguntas-inteligentes.html]link[/url] :evil:
[img]http://www.bbspot.com/Images/News_Features/2003/01/os_quiz/debian.jpg[/img]
(adsbygoogle = window.adsbygoogle || []).push({});
Hum ya es muy raro eso, en
Hum
ya es muy raro eso, en las nuevas versiones de GRUB el excederse del cilindro 1024 no es mayor problema, lo hago a propósito aqui en la máquina de mi niño y no ocurre nada... sólo que tiene que cargar el stage 1.5
posiblemente mejorando tu paquete de grub?
saludos
epe
--
EcuaLinux.com
Ecuador: (02)3412402 - (09)9246504
USA: + 1 404 795 0321
Saludos
epe
EcuaLinux.com
+(593) 9 9924 6504
Servicios en Software Libre