hola adjunto la salida del comando dmesg, tenia la salida de los arhivos que mencionas pero no me abren los archivos los adjuntare mañana en la mañana:
aca el print de la salida.
]0;root@internet:~[root@internet ~]# dmesg
Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 16:24:47 EST 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006b770000 (usable)
BIOS-e820: 000000006b770000 - 000000006b780000 (ACPI data)
BIOS-e820: 000000006b780000 - 000000006b7d0000 (ACPI NVS)
BIOS-e820: 000000006b7d0000 - 000000006b7e0000 (reserved)
BIOS-e820: 000000006b7eb400 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
823MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 440176
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 210800 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP (v000 ACPIAM ) @ 0x000faa80
ACPI: RSDT (v001 102010 RSDT1543 0x20101020 MSFT 0x00000097) @ 0x6b770000
ACPI: FADT (v001 A_M_I OEMFACP 0x12000601 MSFT 0x00000097) @ 0x6b770200
ACPI: MADT (v001 102010 APIC1543 0x20101020 MSFT 0x00000097) @ 0x6b770390
ACPI: MCFG (v001 102010 OEMMCFG 0x20101020 MSFT 0x00000097) @ 0x6b770420
ACPI: OEMB (v001 102010 OEMB1543 0x20101020 MSFT 0x00000097) @ 0x6b780040
ACPI: AAFT (v001 102010 OEMAAFT 0x20101020 MSFT 0x00000097) @ 0x6b77a460
ACPI: GSCI (v001 102010 GMCHSCI 0x20101020 MSFT 0x00000097) @ 0x6b7800c0
ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20051117) @ 0x6b783930
ACPI: DSDT (v001 AS342 AS342174 0x00000174 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Processor #5 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Detected 3078.897 MHz processor.
Built 1 zonelists. Total pages: 440176
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c076c000 soft=c074c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1737592k/1760704k available (2189k kernel code, 21832k reserved, 912k data, 228k init, 843200k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6157.79 BogoMIPS (lpj=3078897)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 28000000 00000000 13000940 009ae3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 11000
CPU 1 irqstacks, hard=c076d000 soft=c074d000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6156.58 BogoMIPS (lpj=3078293)
CPU: After generic identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 28000000 00000000 13000940 009ae3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 2/4 eip 11000
CPU 2 irqstacks, hard=c076e000 soft=c074e000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6156.60 BogoMIPS (lpj=3078303)
CPU: After generic identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: After all inits, caps: bfebf3ff 28000000 00000000 13000940 009ae3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 3/5 eip 11000
CPU 3 irqstacks, hard=c076f000 soft=c074f000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6156.61 BogoMIPS (lpj=3078305)
CPU: After generic identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28000000 00000000 02000000 009ae3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: After all inits, caps: bfebf3ff 28000000 00000000 13000940 009ae3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz stepping 05
Total of 4 processors activated (24627.59 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=15,75
checking if image is initramfs... it is
Freeing initrd memory: 2571k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
pnp: 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0c: ioport range 0x290-0x29f has been reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x6bffffff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window 0x00000000faf00000-0x00000000faffffff
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window 0x00000000fae00000-0x00000000faefffff
PCI: Bridge: 0000:00:1c.5
IO window: d000-0000
MEM window: fbe00000-00000000
PREFETCH window 0x00000000fad00000-0x00000000fadfffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-0000
MEM window: fbf00000-00000000
PREFETCH window 0x0000000088000000-0x00000000880fffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1311292060.924:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 5CDF8508361AAFBF
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C3[C3])
ACPI: CPU2 (power states: C1[C1] C3[C3])
ACPI: CPU1 (power states: C1[C1] C3[C3])
ACPI: CPU3 (power states: C1[C1] C3[C3])
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel IRONLAKE/D Chipset.
agpgart: Detected 262140K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hdb: TSSTcorp CDDVDW SH-222AB, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
hdd: WDC WD5000AAKX-083CA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdd: max request size: 512KiB
hdd: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63
hdd: cache flushes supported
hdd: hdd1 hdd2 hdd3 hdd4 < hdd5 hdd6 hdd7 hdd8 >
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 413k
Time: tsc clocksource has been installed.
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 177, io mem 0xfbdf6000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 217, io mem 0xfbdfc000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
ata_piix 0000:00:1f.2: 0x170 IDE port busy
ata_piix 0000:00:1f.2: no available legacy port
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 225
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 225
ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 225
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new high speed USB device using ehci_hcd and address 3
ata2: SATA link down (SStatus 0 SControl 300)
Initializing USB Mass Storage driver...
usb 1-1.1: configuration #1 chosen from 1 choice
usb 2-1.3: new low speed USB device using ehci_hcd and address 3
usb 2-1.3: configuration #1 chosen from 1 choice
input: USB USB Keykoard as /class/input/input0
input: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.3
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB USB Keykoard as /class/input/input1
input: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.3
usb 2-1.4: new low speed USB device using ehci_hcd and address 4
usb 2-1.4: configuration #1 chosen from 1 choice
input: Genius Optical Mouse as /class/input/input2
input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.4
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: Generic- Model: SD/MMC Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sda
Vendor: Generic- Model: Compact Flash Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:1: Attached scsi removable disk sdb
Vendor: Generic- Model: SM/xD-Picture Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:2: Attached scsi removable disk sdc
Vendor: Generic- Model: MS/MS-Pro Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:3: Attached scsi removable disk sdd
usb-storage: device scan complete
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1311292103.848:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input3
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:1: Attached scsi generic sg1 type 0
sd 2:0:0:2: Attached scsi generic sg2 type 0
sd 2:0:0:3: Attached scsi generic sg3 type 0
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp 0000:04:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:04:00.0: Try the "8139too" driver instead.
8139cp 0000:04:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:04:01.0: Try the "8139too" driver instead.
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 233
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 50
eth0: RealTek RTL8139 at 0xf887a800, 00:e0:52:bf:16:12, IRQ 50
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 58
eth1: RealTek RTL8139 at 0xf887ec00, 00:e0:52:c0:f0:41, IRQ 58
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
r8169 Gigabit Ethernet driver 2.3LK-1-NAPI loaded
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth2: RTL8168d/8111d at 0xf8c2a000, 00:25:22:a0:6f:1e, XID 081000c0 IRQ 66
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1b.0 to 64
floppy0: no floppy controllers found
work still pending
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on hdd2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-1.4: USB disconnect, address 4
usb 2-1.4: new low speed USB device using ehci_hcd and address 5
usb 2-1.4: configuration #1 chosen from 1 choice
input: Genius Optical Mouse as /class/input/input4
input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.4
Adding 2096440k swap on /dev/hdd8. Priority:-1 extents:1 across:2096440k
IA-32 Microcode Update Driver: v1.14a
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
IPv6: Loaded, but administratively disabled, reboot required to enable
Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
eth0: link down
r8169: eth2: link down
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized i915 1.8.0 20060929 on minor 0
usb 1-1.3: new high speed USB device using ehci_hcd and address 4
usb 1-1.3: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Flash Model: Drive SM_USB20 Rev: 1100
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sde: 7929856 512-byte hdwr sectors (4060 MB)
sde: Write Protect is off
sde: Mode Sense: 43 00 00 00
sde: assuming drive cache: write through
SCSI device sde: 7929856 512-byte hdwr sectors (4060 MB)
sde: Write Protect is off
sde: Mode Sense: 43 00 00 00
sde: assuming drive cache: write through
sde: sde1
sd 3:0:0:0: Attached scsi removable disk sde
sd 3:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
usb 1-1.3: USB disconnect, address 4
usb 1-1.3: new high speed USB device using ehci_hcd and address 5
usb 1-1.3: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sde: 1994752 512-byte hdwr sectors (1021 MB)
sde: Write Protect is off
sde: Mode Sense: 23 00 00 00
sde: assuming drive cache: write through
SCSI device sde: 1994752 512-byte hdwr sectors (1021 MB)
sde: Write Protect is off
sde: Mode Sense: 23 00 00 00
sde: assuming drive cache: write through
sde: sde1
sd 4:0:0:0: Attached scsi removable disk sde
sd 4:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
usb 1-1.3: USB disconnect, address 5
sd 4:0:0:0: rejecting I/O to device being removed
Buffer I/O error on device sde1, logical block 19024
lost page write due to I/O error on sde1
usb 2-1.6: new high speed USB device using ehci_hcd and address 6
usb 2-1.6: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sde: 1994752 512-byte hdwr sectors (1021 MB)
sde: Write Protect is off
sde: Mode Sense: 23 00 00 00
sde: assuming drive cache: write through
SCSI device sde: 1994752 512-byte hdwr sectors (1021 MB)
sde: Write Protect is off
sde: Mode Sense: 23 00 00 00
sde: assuming drive cache: write through
sde: sde1
sd 5:0:0:0: Attached scsi removable disk sde
sd 5:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
r8169: eth2: link up
Removing netfilter NETLINK layer.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
ip6_tables: (C) 2000-2006 Netfilter Core Team
Removing netfilter NETLINK layer.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
ip6_tables: (C) 2000-2006 Netfilter Core Team
Removing netfilter NETLINK layer.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
Removing netfilter NETLINK layer.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
Removing netfilter NETLINK layer.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
r8169: eth2: link down
r8169: eth2: link up
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link down
r8169: eth2: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
r8169: eth2: link up
Removing netfilter NETLINK layer.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
]0;root@internet:~[root

talvez ustedes que tienen mas conocimiento puedan ver donde esta el problema si es que el problema se pueda ver con este print.

Saludos y gracias a todos.