Forums:
BUENAS TARDES
Agradesco si me peuden indicar donde conseguir informacion para la configuracion de 1 tarjeta XP100 con DAHDI, pues no he logrado configurarla para que salgan llamadas al exterior...
Tengo el siguiente error..
Executing [96169797@miprimerejemplo:1] Dial("SIP/2030-00000004", "DAHDI/1/6169797") in new stack
[Feb 26 13:01:35] WARNING[22238]: channel.c:5801 ast_request: No channel type registered for 'DAHDI'
[Feb 26 13:01:35] WARNING[22238]: app_dial.c:2218 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 66 - Channel not implemented)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [96169797@miprimerejemplo:2] Hangup("SIP/2030-00000004", "") in new stack
== Spawn extension (miprimerejemplo, 96169797, 2) exited non-zero on 'SIP/2030-00000004
Quedo atento.... :? :? :? :) :)
Adicional tengo el siguiente
Adicional tengo el siguiente error..Y no puedo seguir adelante... :D :D :D
[root@proxy modprobe.d]# dahdi_cfg -vvvvvvv
DAHDI Tools Version - 2.6.0
DAHDI Version: 2.6.0
Echo Canceller(s): HWEC
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
1 channels to configure.
DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22)
Selected signaling not supported
Possible causes:
FXO signaling is being used on a FXO interface (use a FXS signaling variant)
RBS signaling is being used on a E1 CCS span
Signaling is being assigned to channel 16 of an E1 CAS span
[root@proxy modprobe.d]#
BUENOS DIAS Hasta el dia de
BUENOS DIAS
Hasta el dia de ayer logre que la tarjeta XP100 me funcionara con el DAHDI y Asterisk.. al dia de hoy amanecio muerta.. con el siguiente mensaje de error..
[root@proxy dahdi]# service dahdi restart
Unloading DAHDI hardware modules: done
Loading DAHDI hardware modules:
wcfxo: FATAL: Error inserting wcfxo (/lib/modules/2.6.32-220.4.2.el6.x86_64/dahdi/wcfxo.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[FALLÃ]
wctdm: [ OK ]
Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22)
Selected signaling not supported
Possible causes:
FXS signaling is being used on a FXS interface (use a FXO signaling variant)
RBS signaling is being used on a E1 CCS span
Signaling is being assigned to channel 16 of an E1 CAS span
[FALLÃ]
Estuve revisando el DMESG y tengo esta salida..
dahdi: Detected time shift.
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.0
wcfxo: Unknown parameter `vpmnlptype'
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.0
wcfxo: Unknown parameter `vpmnlptype'
dahdi_ioctl_chanconfig: No channel for number 1
wcfxo: Unknown parameter `vpmnlptype'
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.0
wcfxo: Unknown parameter `vpmnlptype'
dahdi_ioctl_chanconfig: No channel for number 1
dahdi_ioctl_chanconfig: No channel for number 1
dahdi_ioctl_chanconfig: No channel for number 1
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.0
wcfxo: Unknown parameter `vpmnlptype'
dahdi_ioctl_chanconfig: No channel for number 1
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.0
wcfxo: Unknown parameter `vpmnlptype'
dahdi_ioctl_chanconfig: No channel for number 1
[root@proxy dahdi]#
He estado leyendo cuanto articulo al respecto y aun NO encuentro la solucion o pistas para tal obejtivo..
Agradesco los comentarios..
Buenas noches... He estado
Buenas noches...
He estado probando cargando el modulo wcfxo.ko manualmente ..y veo el resultado del dmesg
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.6.0
wcfxo: Unknown parameter `vpmnlptype'
dahdi_ioctl_chanconfig: No channel for number 1
wcfxo 0000:07:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
FXO PCI Master abort
FXO PCI Master abort
FXO PCI Master abort
FXO PCI Master abort
FXO PCI Master abort
y asi sucesivamente hasta llenarse el log con las ultimas lineas...Sera que el Hardware se ha dañado??
Agradesco comentarios..