Problema con salidas a celular Elastix

Forums: 

Hola a todos.
Talvez la pregunta es tonta pero la verdad es que no encuentro la solucion a este inconveniente.

Tengo un servidor elastix con una tarjeta openvox de 8 puertos.

Existen 5 lineas de las cuales solo una tiene salida a celular. Creé 2 grupos g0 con las 4 líneas para llamadas fijas y el g1 con la 5ta línea para llamadas a celular.

2 troncales creadas una para las fijas y otra para las celulares.

Las llamadas locales funcionan a la perfeccion pero las celulares no caminan por nada.

Ojalá pueda alguien colaborarme con alguna ayuda al respecto.

Mis saludos y feliz año a todos.

Mauricio

El archivo:

El archivo:

#include extensions_override_freepbx.conf
; *
;************************** -WARNING- ****************************************

; include extension contexts generated from AMP
#include extensions_additional.conf

; Customizations to this dialplan should be made in extensions_custom.conf
; See extensions_custom.conf.sample for an example.
; If you need to use [macro-dialout-trunk-predial-hook], [ext-did-custom], or
; [from-internal-custom] for example, place these in this file or they will get overwritten.
;
#include extensions_custom.conf
[from-digital]
include => from-pstn

[from-analog]
include => from-dahdi

[from-trunk] ; just an alias since VoIP shouldn't be called PSTN
include => from-pstn

[from-pstn]
include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations
include => ext-did
include => ext-did-post-custom
include => from-did-direct ; MODIFICATION (PL) for findmefollow if enabled, should be before ext-local
include => ext-did-catchall ; THIS MUST COME AFTER ext-did

;-------------------------------------------------------------------------------
; from-pstn-e164-us:
;
; The context is designed for providers who send calls in e164 format and is
; biased towards NPA calls, callerid and dialing rules. It will do the following:
;
; DIDs in an NPA e164 format of +1NXXNXXXXXX will be converted to 10 digit DIDs
;
; DIDs in any other format will be delivered as they are, including e164 non NPA
; DIDs which means they will need the full format including the + in the inbound
; route.
;
; CallerID(number) presented in e164 NPA format will be trimmed to a 10 digit CID
;
; CallerID(number) presented in e164 non-NPA (country code other than 1) will be
; reformated from: + to 011
;
[from-pstn-e164-us]
exten => _+1NXXNXXXXXX/_+1NXXNXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2})
exten => _+1NXXNXXXXXX/_NXXNXXXXXX,2,Goto(from-pstn,${EXTEN:2},1)
exten => _+1NXXNXXXXXX/_+X.,1,Set(CALLERID(number)=011${CALLERID(number):1})
exten => _+1NXXNXXXXXX/_011X.,n,Goto(from-pstn,${EXTEN:2},1)
exten => _+1NXXNXXXXXX,1,Goto(from-pstn,${EXTEN:2},1)
exten => _[0-9+]./_+1NXXNXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2})
exten => _[0-9+]./_NXXNXXXXXX,n,Goto(from-pstn,${EXTEN},1)
exten => _[0-9+]./_+X.,1,Set(CALLERID(number)=011${CALLERID(number):1})
exten => _[0-9+]./_011X.,n,Goto(from-pstn,${EXTEN},1)
exten => _[0-9+].,1,Goto(from-pstn,${EXTEN},1)
exten => s/_+1NXXNXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2})
exten => s/_NXXNXXXXXX,n,Goto(from-pstn,${EXTEN},1)
exten => s/_+X.,1,Set(CALLERID(number)=011${CALLERID(number):1})
exten => s/_011X.,n,Goto(from-pstn,${EXTEN},1)
exten => s,1,Goto(from-pstn,${EXTEN},1)
;-------------------------------------------------------------------------------

;-------------------------------------------------------------------------------
; from-pstn-to-did
;
; The context is designed for providers who send the DID in the TO: SIP header
; only. The format of this header is:
;
; To:
;
; So the DID must be extracted between the sip: and the @, which this does
;
[from-pstn-toheader]
exten => _.,1,Goto(from-pstn,${CUT(CUT(SIP_HEADER(To),@,1),:,2)},1)
;-------------------------------------------------------------------------------

; MODIFICATION (PL)
;
; Required to assure that direct dids go to personal ring group before local extension.
; This could be auto-generated however I it is preferred to be put here and hard coded
; so that it can be modified if ext-local should take precedence in certain situations.
; will have to decide what to do later.
;
[from-did-direct]
include => ext-findmefollow
include => ext-local

; ############################################################################
; Macros [macro]
; ############################################################################

; Rings one or more extensions. Handles things like call forwarding and DND
; We don't call dial directly for anything internal anymore.
; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ...
; Use a Macro call such as the following:
; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...)
[macro-dial]
exten => s,1,GotoIf($["${MOHCLASS}" = ""]?dial)
exten => s,n,SetMusicOnHold(${MOHCLASS})
exten => s,n(dial),AGI(dialparties.agi)
exten => s,n,NoOp(Returned from dialparties with no extensions to call and DIALSTATUS: ${DIALSTATUS})

exten => s,n+2(normdial),Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null
exten => s,n,Set(DIALSTATUS=${IF($["${DIALSTATUS_CW}"!="" ]?${DIALSTATUS_CW}:${DIALSTATUS})})
exten => s,n,GosubIf($["${SCREEN}" != "" | "${DIALSTATUS}" = "ANSWER"]?${DIALSTATUS},1)

exten => s,20(huntdial),NoOp(Returned from dialparties with hunt groups to dial )
exten => s,n,Set(HuntLoop=0)
exten => s,n(a22),GotoIf($[${HuntMembers} >= 1]?a30) ; if this is from rg-group, don't strip prefix
exten => s,n,NoOp(Returning there are no members left in the hunt group to ring)

; dialparties.agi has setup the dialstring for each hunt member in a variable labeled HuntMember0, HuntMember1 etc for each iteration
; and The total number in HuntMembers. So for each iteration, we will update the CALLTRACE Data.
;
exten => s,n+2(a30),Set(HuntMember=HuntMember${HuntLoop})
exten => s,n,GotoIf($[$["${CALLTRACE_HUNT}" != "" ] & $[$["${RingGroupMethod}" = "hunt" ] | $["${RingGroupMethod}" = "firstavailable"] | $["${RingGroupMethod}" = "firstnotonphone"]]]?a32:a35)

exten => s,n(a32),Set(CT_EXTEN=${CUT(FILTERED_DIAL,,$[${HuntLoop} + 1])})
exten => s,n,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,n,Goto(s,a42)

;Set Call Trace for each hunt member we are going to call "Memory groups have multiple members to set CALL TRACE For" hence the loop
;
exten => s,n(a35),GotoIf($[$["${CALLTRACE_HUNT}" != "" ] & $["${RingGroupMethod}" = "memoryhunt" ]]?a36:a50)
exten => s,n(a36),Set(CTLoop=0)
exten => s,n(a37),GotoIf($[${CTLoop} > ${HuntLoop}]?a42) ; if this is from rg-group, don't strip prefix
exten => s,n,Set(CT_EXTEN=${CUT(FILTERED_DIAL,,$[${CTLoop} + 1])})
exten => s,n,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,n,Set(CTLoop=$[1 + ${CTLoop}])
exten => s,n,Goto(s,a37)

exten => s,n(a42),Dial(${${HuntMember}}${ds})
exten => s,n,GotoIf($["${DIALSTATUS}" = "ANSWER"]?ANSWER,1)
exten => s,n,Set(HuntLoop=$[1 + ${HuntLoop}])
exten => s,n,GotoIf($[$[$["foo${RingGroupMethod}" != "foofirstavailable"] & $["foo${RingGroupMethod}" != "foofirstnotonphone"]] | $["foo${DialStatus}" = "fooBUSY"]]?a46)
exten => s,n,Set(HuntMembers=0)
exten => s,n(a46),Set(HuntMembers=$[${HuntMembers} - 1])
exten => s,n,Goto(s,a22)

exten => s,n(a50),DBdel(CALLTRACE/${CT_EXTEN})
exten => s,n,Goto(s,a42)

; For call screening
exten => NOANSWER,1,Macro(vm,${SCREEN_EXTEN},BUSY,${IVR_RETVM})
exten => NOANSWER,n,GotoIf($["${IVR_RETVM}" != "RETURN" | "${IVR_CONTEXT}" = ""]?bye)
exten => NOANSWER,n,Return
exten => NOANSWER,n(bye),Macro(hangupcall)
exten => TORTURE,1,Goto(app-blackhole,musiconhold,1)
exten => TORTURE,n,Macro(hangupcall)
exten => DONTCALL,1,Answer
exten => DONTCALL,n,Wait(1)
exten => DONTCALL,n,Zapateller()
exten => DONTCALL,n,Playback(ss-noservice)
exten => DONTCALL,n,Macro(hangupcall)
exten => ANSWER,1,Noop(Call successfully answered - Hanging up now)
exten => ANSWER,n,Macro(hangupcall,)

; make sure hungup calls go here so that proper cleanup occurs from call confirmed calls and the like
;
exten => h,1,Macro(hangupcall)

; get the voicemail context for the user in ARG1
[macro-get-vmcontext]
exten => s,1,Set(VMCONTEXT=${DB(AMPUSER/${ARG1}/voicemail)})
exten => s,2,GotoIf($["foo${VMCONTEXT}" = "foo"]?200:300)
exten => s,200,Set(VMCONTEXT=default)
exten => s,300,NoOp()

; For some reason, if I don't run setCIDname, CALLERID(name) will be blank in my AGI
; ARGS: none
[macro-fixcid]
exten => s,1,Set(CALLERID(name)=${CALLERID(name)})

; Ring groups of phones
; ARGS: comma separated extension list
; 1 - Ring Group Strategy
; 2 - ringtimer
; 3 - prefix
; 4 - extension list
[macro-rg-group]
exten => s,1,Macro(user-callerid,SKIPTTL) ; already called from ringgroup
exten => s,2,GotoIf($["${CALLERID(name):0:${LEN(${RGPREFIX})}}" != "${RGPREFIX}"]?4:3) ; check for old prefix
exten => s,3,Set(CALLERID(name)=${CALLERID(name):${LEN(${RGPREFIX})}}) ; strip off old prefix
exten => s,4,Set(RGPREFIX=${ARG3}) ; set new prefix
exten => s,5,Set(CALLERID(name)=${RGPREFIX}${CALLERID(name)}) ; add prefix to callerid name
exten => s,6,Set(RecordMethod=Group) ; set new prefix
exten => s,7,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
exten => s,8,Set(RingGroupMethod=${ARG1}) ;
exten => s,9,Macro(dial,${ARG2},${DIAL_OPTIONS},${ARG4})
exten => s,10,Set(RingGroupMethod='') ;

;
; Outgoing channel(s) are busy ... inform the client
; but use noanswer features like ringgroups don't break by being answered
; just to play the message.
;
[macro-outisbusy]
exten => s,1,Progress
exten => s,n,Playback(all-circuits-busy-now,noanswer)
exten => s,n,Playback(pls-try-call-later,noanswer)
exten => s,n,Macro(hangupcall)

; dialout and strip the prefix
[macro-dialout]
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,2,GotoIf($["${ECID${CALLERID(number)}}" = ""]?5) ;check for CID override for exten
exten => s,3,Set(CALLERID(all)=${ECID${CALLERID(number)}})
exten => s,4,Goto(7)
exten => s,5,GotoIf($["${OUTCID_${ARG1}}" = ""]?7) ;check for CID override for trunk
exten => s,6,Set(CALLERID(all)=${OUTCID_${ARG1}})
exten => s,7,Set(length=${LEN(${DIAL_OUT_${ARG1}})})
exten => s,8,Dial(${OUT_${ARG1}}/${ARG2:${length}})
exten => s,9,Playtones(congestion)
exten => s,10,Congestion(5)
exten => s,109,Macro(outisbusy)

; dialout using default OUT trunk - no prefix
[macro-dialout-default]
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,2,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,3,Macro(outbound-callerid,${ARG1})
exten => s,4,Dial(${OUT}/${ARG1})
exten => s,5,Playtones(congestion)
exten => s,6,Congestion(5)
exten => s,105,Macro(outisbusy)

[macro-dialout-trunk-predial-hook]
; this macro intentionally left blank so it may be safely overwritten for any custom
; requirements that an installation may have.
;
; MACRO RETURN CODE: ${PREDIAL_HOOK_RET}
; if set to "BYPASS" then this trunk will be skipped
;
exten => s,1,MacroExit()

[macro-user-logon]
; check device type
;
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,n,Answer()
exten => s,n,Wait(1)
exten => s,n,GotoIf($["${DEVICETYPE}" = "fixed"]?s-FIXED,1)
; get user's extension
;
exten => s,n,Set(AMPUSER=${ARG1})
exten => s,n,GotoIf($["${AMPUSER}" != ""]?gotpass)
exten => s,n(playagain),Read(AMPUSER,please-enter-your-extension-then-press-pound,,,4)
; get user's password and authenticate
;
exten => s,n,GotoIf($["${AMPUSER}" = ""]?s-MAXATTEMPTS,1)
exten => s,n(gotpass),GotoIf($["${DB_EXISTS(AMPUSER/${AMPUSER}/password)}" = "0"]?s-NOUSER,1)
exten => s,n,Set(AMPUSERPASS=${DB_RESULT})
exten => s,n,GotoIf($[${LEN(${AMPUSERPASS})} = 0]?s-NOPASSWORD,1)
; do not continue if the user has already logged onto this device
;
exten => s,n,Set(DEVICEUSER=${DB(DEVICE/${CALLERID(number)}/user)})
exten => s,n,GotoIf($["${DEVICEUSER}" = "${AMPUSER}"]?s-ALREADYLOGGEDON,1)
exten => s,n,Authenticate(${AMPUSERPASS})
exten => s,n,AGI(user_login_out.agi,login,${CALLERID(number)},${AMPUSER})
exten => s,n,Playback(vm-goodbye)

exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged into)
exten => s-FIXED,n,Playback(ha/phone)
exten => s-FIXED,n,SayDigits(${CALLERID(number)})
exten => s-FIXED,n,Playback(is-curntly-unavail&vm-goodbye)
exten => s-FIXED,n,Hangup ;TODO should play msg indicated device cannot be logged into

exten => s-ALREADYLOGGEDON,1,NoOp(This device has already been logged into by this user)
exten => s-ALREADYLOGGEDON,n,Playback(vm-goodbye)
exten => s-ALREADYLOGGEDON,n,Hangup ;TODO should play msg indicated device is already logged into

exten => s-NOPASSWORD,1,NoOp(This extension does not exist or no password is set)
exten => s-NOPASSWORD,n,Playback(pbx-invalid)
exten => s-NOPASSWORD,n,Goto(s,playagain)

exten => s-MAXATTEMPTS,1,NoOp(Too many login attempts)
exten => s-MAXATTEMPTS,n,Playback(vm-goodbye)
exten => s-MAXATTEMPTS,n,Hangup

exten => s-NOUSER,1,NoOp(Invalid extension ${AMPUSER} entered)
exten => s-NOUSER,n,Playback(pbx-invalid)
exten => s-NOUSER,n,Goto(s,playagain)

[macro-user-logoff]
; check device type
;
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,n,GotoIf($["${DEVICETYPE}" = "fixed"]?s-FIXED,1)
exten => s,n,AGI(user_login_out.agi,logout,${CALLERID(number)})
exten => s,n(done),Playback(vm-goodbye)

exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged out of)
exten => s-FIXED,n,Playback(an-error-has-occured&vm-goodbye)
exten => s-FIXED,n,Hangup ;TODO should play msg indicated device cannot be logged into

; Privacy Manager Macro makes sure that any calls that don't pass the privacy manager are presented
; with congestion since there have been observed cases of the call continuing if not stopped with a
; congestion, and this provides a slightly more friendly 'sorry' message in case the user is
; legitimately trying to be cooperative.
;
; Note: the following options are configurable in privacy.conf:
;
; maxretries = 3 ; default value, number of retries before failing
; minlength = 10 ; default value, number of digits to be accepted as valid CID
;
[macro-privacy-mgr]
exten => s,1,Set(KEEPCID=${CALLERID(num)})
exten => s,n,GotoIf($["foo${CALLERID(num):0:1}"="foo+"]?CIDTEST2:CIDTEST1)
exten => s,n(CIDTEST1),Set(TESTCID=${MATH(1+${CALLERID(num)})})
exten => s,n,Goto(TESTRESULT)
exten => s,n(CIDTEST2),Set(TESTCID=${MATH(1+${CALLERID(num):1})})
exten => s,n(TESTRESULT),GotoIf($["foo${TESTCID}"="foo"]?CLEARCID:PRIVMGR)
exten => s,n(CLEARCID),Set(CALLERID(num)=)
exten => s,n(PRIVMGR),PrivacyManager(${ARG1},${ARG2})
exten => s,n,GotoIf($["${PRIVACYMGRSTATUS}"="FAILED"]?fail)
exten => s,n,GosubIf($["${CALLED_BLACKLIST}" = "1"]?app-blacklist-check,s,1)
exten => s,n,SetCallerPres(allowed_passed_screen); stop gap until app_privacy.c clears unavailable bit
exten => s,PRIVMGR+101(fail),Noop(STATUS: ${PRIVACYMGRSTATUS} CID: ${CALLERID(num)} ${CALLERID(name)} CALLPRES: ${CALLLINGPRES})
exten => s,n,Playback(sorry-youre-having-problems)
exten => s,n,Playback(goodbye)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
exten => h,1,Hangup

; Text-To-Speech related macros
; These all follow common actions. First try to playback a file "tts/custom-md5"
; where "md5" is the md5() of whatever is going to be played. If that doesn't exist,
; try to playback using macro-tts-sayXXXXX (where XXXXX is text/digits/etc, same as
; the macro below). If that macro exits with MACRO_OFFSET=100, then it's done,
; otherwise, fallback to the default asterisk method.
;
; say text is purely for text-to-speech, there is no fallback
[macro-saytext]
exten => s,1,Noop(Trying custom SayText playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-saytext. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saytext,${ARG1},${ARG2},${ARG3})
exten => s,n,Noop(No text-to-speech handler for SayText, cannot say "${ARG1}")
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled saytext)

; say name is for saying names typically, but fallsback to using SayAlpha
; (saying the word letter-by-letter)
[macro-sayname]
exten => s,1,Noop(Trying custom SayName playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-sayalpha. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-sayalpha,${ARG1},${ARG2},${ARG3})
exten => s,n,SayAlpha(${ARG1})
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled sayname)

; Say number is for saying numbers (eg "one thousand forty six")
[macro-saynumber]
exten => s,1,Noop(Trying custom SayNumber playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-saynumber. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saynumber,${ARG1},${ARG2},${ARG3})
exten => s,n,SayNumber(${ARG1})
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled saynumber)

; Say digits is for saying digits one-by-one (eg, "one zero four six")
[macro-saydigits]
exten => s,1,Noop(Trying custom SayDigits playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-saydigits. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saydigits,${ARG1},${ARG2},${ARG3})
exten => s,n,SayDigits(${ARG1})
exten => s,n,Goto(done)

;
; ############################################################################
; Inbound Contexts [from]
; ############################################################################

[from-sip-external]
; Yes. This is _really_ meant to be _. - I know asterisk whines about it, but
; I do know what I'm doing. This is correct.
exten => _.,1,NoOp(Received incoming SIP connection from unknown peer to ${EXTEN})
exten => _.,n,Set(DID=${IF($["${EXTEN:1:2}"=""]?s:${EXTEN})})
exten => _.,n,Goto(s,1)
exten => s,1,GotoIf($["${ALLOW_SIP_ANON}"="yes"]?checklang:noanonymous)
exten => s,n(checklang),GotoIf($["${SIPLANG}"!=""]?setlanguage:from-trunk,${DID},1)
exten => s,n(setlanguage),Set(CHANNEL(language)=${SIPLANG})
exten => s,n,Goto(from-trunk,${DID},1)
exten => s,n(noanonymous),Set(TIMEOUT(absolute)=15)
exten => s,n,Answer
exten => s,n,Wait(2)
exten => s,n,Playback(ss-noservice)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
exten => h,1,Hangup
exten => i,1,Hangup
exten => t,1,Hangup

[from-internal-xfer]
; applications are now mostly all found in from-internal-additional in _custom.conf
include => from-internal-custom
include => parkedcalls

; MODIFIED (PL)
;
; Currently the include for findmefollow is being auto-generated before ext-local which is the desired behavior.
; However, I haven't been able to do anything that I know of to force this. We need to determine if it should
; be hardcoded into here to make sure it doesn't change with some configuration. For now I will leave it out
; until we can discuss this.
;
include => ext-local-confirm
include => findmefollow-ringallv2
include => from-internal-additional
; This causes grief with '#' transfers, commenting out for the moment.
; include => bad-number
exten => s,1,Macro(hangupcall)
exten => h,1,Macro(hangupcall)

[from-internal]
include => from-internal-xfer
include => bad-number

;------------------------------------------------------------------------
; [macro-setmusic]
;------------------------------------------------------------------------
; CONTEXT: macro-setmusic
; PURPOSE: to turn off moh on routes where it is not desired
;
;------------------------------------------------------------------------
[macro-setmusic]
exten => s,1,NoOp(Setting Outbound Route MoH To: ${ARG1})
exten => s,2,Set(CHANNEL(musicclass)=${ARG1}) ; this won't work in 1.2 anymore, could fix in auto-generate if we wanted...
;------------------------------------------------------------------------

; ##########################################
; ## Ring Groups with Confirmation macros ##
; ##########################################
; Used by followme and ringgroups

;------------------------------------------------------------------------
; [macro-dial-confirm]
;------------------------------------------------------------------------
; This has now been incorporated into dialparties. It still only works with ringall
; and ringall-prim strategies. Have not investigated why it doesn't work with
; hunt and memory hunt.
;
;------------------------------------------------------------------------
[macro-dial-confirm]
; This was written to make it easy to use macro-dial-confirm instead of macro-dial in generated dialplans.
; This takes the same parameters, with an additional parameter of the ring group Number
; ARG1 is the timeout
; ARG2 is the DIAL_OPTIONS
; ARG3 is a list of xtns to call - 203-222-240-123123123#-211
; ARG4 is the ring group number

; This sets a unique value to indicate that the channel is ringing. This is used for warning slow
; users that the call has already been picked up.
;
exten => s,1,Set(DB(RG/${ARG4}/${CHANNEL})=RINGING)

; We need to keep that channel variable, because it'll change when we do this dial, so set it to
; fallthrough to every sibling.
;
exten => s,n,Set(__UNIQCHAN=${CHANNEL})

; The calling ringgroup should have set RingGroupMethod appropriately. We need to set two
; additional parameters:
;
; USE_CONFIRMATION, RINGGROUP_INDEX
;
; These are passed to inform dialparties to place external calls through the [grps] context
;
exten => s,n,Set(USE_CONFIRMATION=TRUE)
exten => s,n,Set(RINGGROUP_INDEX=${ARG4})
exten => s,n,Set(ARG4=) ; otherwise it gets passed to dialparties.agi which processes it (prob bug)

exten => s,n,Macro(dial,${ARG1},${ARG2},${ARG3})

; delete the variable, if we are here, we are done trying to dial and it may have been left around
;
exten => s,n,Noop(DELETE KEY: RG/${RINGGROUP_INDEX}/${CHANNEL}: ${DB_DELETE(RG/${RINGGROUP_INDEX}/${CHANNEL})})
exten => s,n,Set(USE_CONFIRMATION=)
exten => s,n,Set(RINGGROUP_INDEX=)
;------------------------------------------------------------------------

;------------------------------------------------------------------------
; [ext-local-confirm]
;------------------------------------------------------------------------
; If call confirm is being used in a ringgroup, then calls that do not require confirmation are sent
; to this extension instead of straight to the device.
;
; The sole purpose of sending them here is to make sure we run Macro(auto-confirm) if this
; extension answers the line. This takes care of clearing the database key that is used to inform
; other potential late comers that the extension has been answered by someone else.
;
; ALERT_INFO is deprecated in Asterisk 1.4 but still used throughout the FreePBX dialplan and
; usually set by dialparties.agi. This allows inheritance. Since no dialparties.agi here, set the
; header if it is set.
;
;------------------------------------------------------------------------
[ext-local-confirm]
exten => _LC-.,1,Noop(IN ext-local-confirm with - RT: ${RT}, RG_IDX: ${RG_IDX})
exten => _LC-.,n,GotoIf($["x${ALERT_INFO}"="x"]?godial)
exten => _LC-.,n,SIPAddHeader(Alert-Info: ${ALERT_INFO})
exten => _LC-.,n(godial),dial(${DB(DEVICE/${EXTEN:3}/dial)},${RT},M(auto-confirm^${RG_IDX})${DIAL_OPTIONS})

;------------------------------------------------------------------------
; [findmefollow-ringallv2]
;------------------------------------------------------------------------
; This context, to be included in from-internal, implements the PreRing part of findmefollow
; as well as the GroupRing part. It also communicates between the two so that if DND is set
; on the primary extension, and mastermode is enabled, then the other extensions will not ring
;
;------------------------------------------------------------------------
[findmefollow-ringallv2]
exten => _FMPR-.,1,Noop(In FMPR ${FMGRP} with ${EXTEN:5})
exten => _FMPR-.,n,Set(RingGroupMethod=)
exten => _FMPR-.,n,Set(USE_CONFIRMATION=)
exten => _FMPR-.,n,Set(RINGGROUP_INDEX=)
exten => _FMPR-.,n,Macro(simple-dial,${EXTEN:5},${FMREALPRERING})
exten => _FMPR-.,n,GotoIf($["${DIALSTATUS}" != "BUSY"]?nodnd)
exten => _FMPR-.,n,Set(DB(FM/DND/${FMGRP}/${FMUNIQUE})=DND)
exten => _FMPR-.,n(nodnd),Noop(Ending FMPR ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMPR-.,n,Hangup()

exten => _FMGL-.,1,Noop(In FMGL ${FMGRP} with ${EXTEN:5})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(${FMPRERING})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n(dodial),Macro(dial,${FMGRPTIME},${DIAL_OPTIONS},${EXTEN:5})
exten => _FMGL-.,n,Noop(Ending FMGL ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMGL-.,n,Hangup()
exten => _FMGL-.,n+10(dodnd),DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n,GotoIf($["${FMPRIME}" = "FALSE"]?dodial)
exten => _FMGL-.,n,Noop(Got DND in FMGL ${FMGRP} with ${EXTEN:5} in ${RingGroupMethod} mode, aborting)
exten => _FMGL-.,n,Hangup()

;------------------------------------------------------------------------
; [block-cf]
;------------------------------------------------------------------------
; This context is set as a target with FORWARD_CONTEXT when Call Forwarding is set to be
; ignored in a ringgroup or other features that may take advantage of this. Server side
; CF is done in dialparties.agi but if a client device forwards a call, it will be caught
; and blocked here.
;------------------------------------------------------------------------
[block-cf]
exten => _X.,1,Noop(Blocking callforward to ${EXTEN} because CF is blocked)
exten => _X.,n,Hangup()

;------------------------------------------------------------------------

;this is where parked calls go if they time-out. Should probably re-ring
[default]
include => ext-local
exten => s,1,Playback(vm-goodbye)
exten => s,2,Macro(hangupcall)

Ojala encuentres algo.

Gracias de antemano.

Mauricio

En extensions_custom.conf

Imagen de Astrosendero

Hola Disculpa la demora, mira en extensions_custom.conf debe estar el contexto que creaste para la linea 5 (que es donde tienes la salida a celulares, segun lo que expones)

para celulares de mèxico la configuracion debe ser mas o menos asì:

[celulares]
exten => _904[45]XXXXXXXXXX,1,Dial(DAHDI/g1/${EXTEN:1})
exten => _904[45]XXXXXXXXXX,2,Hangup

¿que version de elastix tienes?

saludos

Gerardo Jacinto Astudillo